manualshive.com logo in svg

Sharp DX-C311 - Color - All-in-One, Руководство по эксплуатации

Sharp DX-C311 - цветной многофункциональный принтер, который объединяет в себе печать, сканирование и копирование. Бесплатное руководство по эксплуатации доступно для загрузки на manualshive.com. Ознакомьтесь с инструкцией перед использованием принтера Sharp DX-C311 для оптимальной работы и результатов.

Поделиться
Скачать
background image

8-23

TROUBLESHOOTING

Contents

PROBLEMS RELATED TO SCANNING / INTERNET FAX 
OPERATION

SCANNING / INTERNET FAX

PROBLEMS RELATED TO SCANNING / INTERNET FAX OPERATION

• Transmission does not take place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-23

• An address cannot be specified.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-24

• Mode cannot be selected.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-24

• Auto selection of the color mode does not take place correctly.. . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-24

• The received image file cannot be opened.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-25

• Transmission takes a long time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-25

• A destination is pre-selected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-25

• Cannot write to USB memory. (When using USB Memory Scan.) . . . . . . . . . . . . . . . . . . . . . . . . . . .8-25

PROBLEMS RELATED TO SCAN RESULTS

• The scanned image is clipped. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-26

• The quality of the scanned image is poor.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-26

• The scanned image is blank.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-26

• The scanned image is upside down or on its side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-26

• The [COLOR START] key indicator is not lit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-26

• JPEG was selected for the file type but the file was created as a TIFF file. . . . . . . . . . . . . . . . . . . . .8-27

• The image is too light or too dark. (When using PC Scan.)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-27

PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL KEYS / GROUP KEYS

• A one-touch individual key or group key cannot be stored.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-28

• A one-touch individual key or group key cannot be edited or deleted. . . . . . . . . . . . . . . . . . . . . . . . .8-28

• If you cannot find the item that you are looking for in the above table of contents, see "

GENERAL PROBLEMS

" (page 

8-31).

• If you are unable to solve a problem using the solutions in this manual, switch off the [POWER] key (

) and the 

main power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key (

) 

in that order.

Caution:

When the LINE indicator is lit or the DATA indicator is lit or blinking, do not switch off the main power switch or 
unplug the power plug. This may damage the hard drive or cause the data being stored or received to be lost.

Problem

Point to check

Solution

Transmission does 
not take place.

Did you select the correct destination? 
Is the correct information (e-mail 
address or FTP server information) 
stored for that destination?

Make sure that the correct destination information is 
stored for the destination and that the destination is 
correctly selected. If delivery by e-mail (Scan to E-mail) 
is unsuccessful, an error message such as "Undelivered 
Message" may be sent to the designated administrator's 
e-mail address. This information may help you 
determine the cause of the problem.

Содержание DX-C311 - Color - All-in-One




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DX-C311 - Color - All-in-One

Canon imagePROGRAF W8400 Driver Manual preview
imagePROGRAF W8400
Бренд: Canon Страницы: 24
Canon imagePROGRAF TZ-30000 Setup Manual preview
imagePROGRAF TZ-30000
Бренд: Canon Страницы: 66
Canon imagePROGRAF W7200 Setup Manual preview
imagePROGRAF W7200
Бренд: Canon Страницы: 126
Canon imagePROGRAFi iPF840 series Basic Manual preview
imagePROGRAFi iPF840 series
Бренд: Canon Страницы: 149
Canon IPF850 Basic Manual preview
IPF850
Бренд: Canon Страницы: 166
Canon iP4000 - PIXMA Photo Printer Start Here preview
iP4000 - PIXMA Photo Printer
Бренд: Canon Страницы: 2
Olympus P 400 Firmware Upgrade Manual preview
P 400
Бренд: Olympus Страницы: 3
Canon BW Remote Operators Software Kit-A1 Service Manual preview
BW Remote Operators Software Kit-A1
Бренд: Canon Страницы: 20
Canon imageRUNNER 2420 Trouble Error Codes List preview
imageRUNNER 2420
Бренд: Canon Страницы: 30
Canon IPF850 Service Manual preview
IPF850
Бренд: Canon Страницы: 51
Canon imageCLASS LBP325dn Service Manual preview
imageCLASS LBP325dn
Бренд: Canon Страницы: 252
Ier I420 User Safety And Start Manual preview
I420
Бренд: Ier Страницы: 8
Panasonic KX-P8415 Operating Instructions preview
KX-P8415
Бренд: Panasonic Страницы: 3
Panasonic KX-P7105 Operating Instructions preview
KX-P7105
Бренд: Panasonic Страницы: 4
Magicard Prima Brochure preview
Prima
Бренд: Magicard Страницы: 6
idp SMART-30R User Manual preview
SMART-30R
Бренд: idp Страницы: 88
Canon PIXMA MG5600 Series User Manual preview
PIXMA MG5600 Series
Бренд: Canon Страницы: 4
Canon TS8250 Online Manual preview
TS8250
Бренд: Canon Страницы: 521

Бренды по названию

Популярные бренды

Загрузить еще бренды