Sharp AR M162 - B/W Laser - All-in-One Скачать руководство пользователя страница 349

Страница: 349 / 372

SETUP IN A WINDOWS ENVIRONMENT

Configure the settings and then click
the [Update] button.

Be sure to ask your network administrator for the
correct IP address, subnet mask, and default
gateway to be entered.

Your changes to the settings appear.
Make sure that the changes are
correct and then click the [OK] button.

Restart the machine.

Power off the machine and then power it back on.

Select [Search] from the [File] menu.

The IP address that you entered will appear.
Make sure that it is correct.

This completes the procedure for setting the IP
address.

Содержание AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы:

Sharp AR M162 - B/W Laser - All-in-One, Руководство по эксплуатации, Страница: 349 / 372

Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы: