Sharp AR M162 - B/W Laser - All-in-One Скачать руководство пользователя страница 34

Страница: 34 / 372

TROUBLESHOOTING AND MAINTENANCE

Misfeed in B

Open the front cover.

Push gently on both ends of the
front cover.

Turn the roller rotating knob in the
direction of the arrow.

Lower the right and left fusing unit
release levers and remove the misfed
paper.

Be careful not to tear the misfed
paper during removal.

Lift the fusing unit release levers.

Close the front cover and the side
cover.

The message "

Clear paper

path." will be cleared and
copying will be possible.

The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.

• Do not touch the photoconductive drum

(green portion) when removing the misfed
paper. Doing so may damage the drum
and cause smudges on copies.

• Take care not to allow unfixed toner on

the misfed paper to soil your hands or
clothes.

Roller
rotating knob

Fusing unit release levers

Warning

Caution

• When closing the front cover, gently hold

both ends.

• When closing the side cover, hold the

handle.

• If the message does not clear, check

again to make sure that no pieces of
paper remain.

Note

Содержание AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы:

Sharp AR M162 - B/W Laser - All-in-One, Руководство по эксплуатации, Страница: 34 / 372

Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы: