Sharp AR M162 - B/W Laser - All-in-One Скачать руководство пользователя страница 14

Страница: 14 / 372

BEFORE USING THE PRODUCT

This chapter contains basic information required for use of the machine. Please read this chapter before using the
machine.

PART NAMES AND FUNCTIONS

(1)

USB 2.0 port (USB-2) (when the dual function
board is installed)

Connect to your computer to this port to use the
printer and scanner functions.

(2)

USB 1.1 port (USB-1)

Connect to your computer to this port to use the
printer and scanner functions.

(3)

Parallel port

Connect to your computer to this port to use the
printer function.

(4)

Charger cleaner

Use to clean the transfer charger.

(5)

Glass cleaner

Use to clean the original scanning glass.

(6)

Document glass

Place an original that you wish to scan face down
here. (Page 45)

(7)

Handles

Use to move the machine.

(8)

Power switch

Press to turn the machine power on and off.

(9)

Center tray

Copies and printed pages are output to this tray.

(10) Top tray (when the job separator tray kit is

installed)

Received faxes (when the fax option is installed)
and print jobs are delivered to this tray.

(11) Operation panel

Contains operation keys and indicator lights.

(12) Front cover

Open to remove paper misfeeds or replace the
toner cartridge.

(13) Tray 1

Tray 1 can hold approximately 250 sheets of
copy paper (20 lbs. (80

)).

For restrictions on paper types and weights, see
"PAPER" (page 18).

(14) Tray 2

Tray 2 can hold approximately 250 sheets of
copy paper (20 lbs. (80

)).

For restrictions on paper types and weights, see
"PAPER" (page 18).

(15)

(11)

(12)

(13)

(14)

(10)

(9)

(2)

(1)

(3)

(6)

(7)

(8)

(7)

(16)

(17)

(18) (19)

(20)

(5)

(4)

Содержание AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы:

Sharp AR M162 - B/W Laser - All-in-One, Руководство по эксплуатации, Страница: 14 / 372

Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы: