Sharp AR M162 - B/W Laser - All-in-One Скачать руководство пользователя страница 13

Страница: 13 / 372

MAIN FEATURES

Fax function (option)

Installation of the optional facsimile expansion kit enables the plain-paper, Super G3 laser fax function to be used.

Network connection (option)

The optional network expansion kit (AR-NB3) can be installed to enable the machine to be used as a network printer
and network scanner.

Environment and people friendly design

• Preheat and auto power shut-off modes are provided to reduce power consumption when the machine is not in

active use.

• A universal design has been implemented in the product whereby the height of the operation panel and shape of

the keys are designed to be usable by as many people as possible.

Содержание AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы:

Sharp AR M162 - B/W Laser - All-in-One, Руководство по эксплуатации, Страница: 13 / 372

Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы: