Sharp AR M162 - B/W Laser - All-in-One Скачать руководство пользователя страница 134 | Manualshive

Страница: 134 / 372

Sharp AR M162 - B/W Laser - All-in-One Скачать руководство пользователя страница 134

5

TO USE THIS PRODUCT CORRECTLY AS A FACSIMILE

Lithium battery

A lithium battery in the machine is used to retain settings and programmed information such as auto-dial numbers
(page 62).

• When the battery dies, settings and programmed information will be lost, so please keep a record of this

information. (See "PRINTING LISTS OF PROGRAMMED INFORMATION, SETTINGS, AND COMMUNICATION
ACTIVITY" on page 81.)

• The life of the battery is approximately 5 years when the power switch is kept continuously off.
• When the battery dies, please contact your local Sharp dealer or authorised service representative for assistance

in disposing of this battery. The machine will not operate once the battery dies.

Please note

In the event of a thunderstorm, remove the power cord from the power outlet to ensure safety. Information will be
retained in memory even if the power cord is unplugged.

«
...
132
133
134
135
136
...
»

Содержание AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Отзывы:

Нет отзывов