Sharp AR M162 - B/W Laser - All-in-One Скачать руководство пользователя страница 208

Страница: 208 / 372

PROGRAMMING

[EDITING AND DELETING F-CODE RELAY
GROUPS]

Select "CHANGE" or "DELETE" with
the [

] or [

] key.

Press the [OK] key.

• If you selected "CHANGE" in step 9, follow the steps

in "Editing an F-code relay group" which follows.

• If you selected "DELETE" in step 9, follow the steps

in "Deleting an F-code relay group" which follows.

●

Editing an F-code relay group

Select the name of the F-code relay
group (box) that you wish to edit with
the [

] or [

] key.

If not all letters of the box name appear, press the

key to display all letters. Press the

key once again

to return to the original screen.

Press the [OK] key.

Edit the name of the F-code relay
group (box) (see "ENTERING
CHARACTERS" on page 82).

• See step 9 on page 76.
• If you do not wish to edit the name, go to the

next step.

Press the [OK] key.

Edit the sub-address and passcode
(maximum 20 digits) with the numeric
keys.

• See steps 3 to 6 on page 65.
• If you do not need to edit the sub-address and

passcode, press the [OK] key and go to the
next step.

Edit the relay destinations.

See steps 13 to 15 on page 76.

●

Deleting an F-code relay group

Select the name of the F-code relay
group (box) that you wish to delete
with the [

] or [

] key.

If not all letters of the box name appear, press the

key to display all letters. Press the

key once again

to return to the original screen.

Press the [OK] key.

Select "DELETE" with the [

] or [

]

key.

Press the [OK] key.

You will return to step 11. If you
wish to delete another relay
group, repeat steps 11 through
14. To exit, press the [BACK]
key.

PQR

2-SIDED

COPY

SPECIAL FUNCTION

S.A. RELAY GRP

CHANGE

DELETE

GHI

BACK

PQR

2-SIDED

COPY

SPECIAL FUNCTION

S.A. RELAY GRP

SBC CO.

— — — — — —
— — — — — —

[#]:LIST DETAIL

GHI

BACK

PQR

2-SIDED

COPY

SPECIAL FUNCTION

S.A. RELAY GRP

SBC CO.

— — — — — —
— — — — — —

[#]:LIST DETAIL

GHI

BACK

Содержание AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы:

Sharp AR M162 - B/W Laser - All-in-One, Руководство по эксплуатации, Страница: 208 / 372

Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы: