Sharp AR M162 - B/W Laser - All-in-One Скачать руководство пользователя страница 339

Страница: 339 / 372

INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)

If you wish to install Button Manager
or Sharpdesk, click the [Utility
Software] button in step 5.

If you do not wish to install either, go to step 10.

Click the [Button Manager] or
[Sharpdesk] button.

• To view information on the software, click the

[Display Readme] button.

• Follow the on-screen instructions.

Click the [Close] button.

Connect the machine to your
computer with the USB cable. (Page
44)

Make sure that the machine is powered on. The
machine is found and a plug and play window
appears. Follow the on-screen instructions.

This completes the installation.

• If you installed the MFP Driver, see "CONFIGURING

THE PRINTER DRIVER" (page 42) to configure the
printer driver settings.

• If you installed Button Manager, see "SETTING UP

BUTTON MANAGER" (page 18) to set up Button
Manager.

After the installation, a message prompting
you to restart your computer may appear. In
this case, click the [Yes] button to restart
your computer.

If you are using Windows 2000

If a warning message regarding the digital
signature appears, be sure to click the [Yes]
button.

If the dual function board is installed, the
"AR-XXXX (EB)" printer driver and scanner
driver will be installed.

Note

Caution

Note

Содержание AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы:

Sharp AR M162 - B/W Laser - All-in-One, Руководство по эксплуатации, Страница: 339 / 372

Результаты поиска

Содержание AR M162 - B/W Laser - All-in-One

Отзывы: