AR-6020V SIMULATIONS 6-24
50
01
Image lead edge adjustment
Used to adjust the copy image position and the lead edge void amount on the copy paper. This adjustment is made
by adjusting the image scan start position at 100% and the print start position (resist roller ON timing).
(Operating procedure)
When this simulation is executed, the current set value is displayed in two digits. (Center value: 50) When the
[AUTO/TEXT/PHOTO] key is pressed, the setting mode and the display are switched. Enter the adjustment value
with the Numeric keys and press the [START] key, and the entered value is set and a copy is made. (Adjustment
range 1 ~ 99) When the [Interrupt] key is pressed, the entered value is saved and the machine goes into the sub
code entry standby mode. When the [CA] key is pressed, the entered value is saved and the simulation is
terminated. When the adjustment is made with 1st tray paper feed, all the adjustment values at the paper feed ports
become the same.
(When the adjustment value is increased by 1, the position is shifted by about 0.1mm.)
*
The mark, "
", indicates that it is supported only for the installed model, and it is skipped for non-installed
models.
Note: When printing is made with bypass tray, use A3 paper.
When the adjustment value of the print start position is increased by 1, the resist roller ON timing is delayed
and the print image is reduced by 0.1mm. When the adjustment value of the image scan start position is
increased by 1, the scan start position is shifted to the home position by 0.1mm.
[Adjustment procedure]
(1) Set the print start position (A) (AUTO indicator ON), the lead edge void amount (B) (TEXT indicator ON), and
the scan start position (C) (PHOTO indicator ON) to <1>, and make a 100% copy.
(2) Measure the image loss (R mm) of the scale. Set as C=10 x R (mm). (Example: Set to 40.)
When the value of C is increased by 10, the image loss is decreased by 1mm.
(3) Measure the distance between the paper lead edge and the image print start position.
Set as A=10 x H (mm). (Example: Set to 50.)
When the value of A is increased by 10, the image lead edge is shifted toward the paper lead edge by 1mm.
(Default: 50)
(4) Set the lead edge void area as B=50 (2.5mm).
When the value of B is increased by 10, the void is increased by about 1mm.
(For 25 or less, however, the void amount is zero.)
(Example)
06
Copy lead edge position adjustment
(RSPF)
(Only when the RSPF is installed)
Used to make the RSPF copy lead edge position adjustment.
*
When the adjustment value of the document scan start position is increased by 1, the scan start timing is
advanced by 0.1mm. The print image is shifted to the reverse side of the scan start position.
(Adjustment range: 1 ~ 99)
<Adjustment items>
Main
code
Sub
code
Contents
Details of operation
LED
Adjustment mode
Default
AUTO, 1st tray indicator
AUTO, 2nd tray indicator
AUTO, Bypass tray indicator
TEXT indicator
PHOTO indicator
AUTO, TEXT, PHOTO indicator
Print start position (1st tray paper feed)
Print start position (2nd / 3rd / 4th tray paper feed)
Print start position (Bypass tray)
Image lead edge void amount
Image scan start position
Image rear edge void amount
65
65
65
51
51
41
5mm
10mm
Image loss
R=4mm
Distance from the paper lead edge
to the image lead edge H = 5mm
LED
Adjustment mode
Default
AUTO indicator
TEXT indicator
PHOTO indicator
Front document scan position adjustment
Back document scan position adjustment
Rear edge void adjustment (RSPF)
62
59
51
