AR-168N/168L TEST COMMAND, TROUBLE CODES 10 - 3
4. Descriptions of various test commands
Main
code
Sub
code
Contents
Details of function/operation
1
01
Mirror scan (SCAN CHK)
[Function]
When [ENTER/START] key is pressed, the home position is checked and the mirror base performs
full scan at the speed of the set magnification ratio.
During operation, the set magnification ratio is displayed.
The mirror home position sensor status is displayed with the “COPY mode lamp”. (When the mirror is
in the home position, the lamp lights up.)
During operation, the copy lamp lights up.
When [C] key is pressed, if the operation is on the way, it is terminated and the machine goes to the
sub code entry standby mode.
[Operation]
02
Mirror home position sensor
(MHPS) status display
(MHP-SENSOR)
[Function]
Monitors the mirror home position sensor, and makes the "COPY mode lamp" turn on during the sen-
sor ON status.
[Operation]
06
Mirror scan aging (SCAN
AGING)
[Function]
When [ENTER/START] key is pressed, the mirror base performs full scan at the speed of the set
magnification ratio.
During operation, the set magnification ratio is displayed.
After 3sec, the mirror base performs full scan again.
∗
When [ENTER/START] key is pressed once, the ready lamp remains OFF.
The mirror home position sensor status is displayed on the "COPY mode lamp." (The lamp is ON
when the mirror is in the home position.)
During aging, the copy lamp is ON.
[Operation]
The operation is similar to test command 1-01.
2
01
Single Paper Feeder (SPF)
aging (SPF AGING)
(Disabled when set to OC)
[Function]
When [ENTER/START] key is pressed, the set magnification ratio is acquired and single-face docu-
ment transport is performed in the case of SPF or duplex document transport in the case of R-SPF.
However, the operating conditions don't matter and the operation is not stopped even in case of a
jam. Also the magnification ratio is displayed on the LCD.
[Operation]
The operation is similar to test command 1-01.
02
SPF sensor status display
(SPF SENSOR) (Disabled
when set to OC)
[Function]
The ON/OFF status of the SPF sensors can be checked with the LCD.
When a sensor is ON, the sensor name is displayed on the LCD.
[Operation]
03
SPF motor operation check
(SPF MOTOR CHK)
(Disabled when set to OC)
[Function]
When [ENTER/START] key is pressed, the motor rotates for 10sec at the speed corresponding to the
set magnification ratio.
[Operation]
The operation is similar to test command 1-01.
1) Initial display
2) [ZOOM]
2) [
←
]
2) [
→
]
3) [ENTER/START]
01-01 SCAN CHK
- 100% +
01-01 SCAN CHK
- 78% +
01-01 SCAN CHK
- 99% +
01-01 SCAN CHK
- 101% +
01-01 SCAN CHK
EXECUTING... - 78% +
1) Initial display
01-02 MHP-SENSOR
EXECUTING...
Sensor
Display item
Document set sensor
SPID
SPF document transport sensor
SPPD
SPF paper feed cover open/close sensor
SDSW
1) Initial display
2) When the sensor is ON:
02-02 SPF SENSOR
02-02 SPF SENSOR
SPID SPPD SDSW
10̲TESTCOMMAND.fm 3 ページ ２００５年１１月１８日 金曜日 午後５時３７分
