AR-168N/168L UNPACKING AND INSTALLATION 5 - 6
8) When the "Finish" screen appears, click the "Close" button.
A message will appear instructing you to connect the machine to
your computer. Click the "OK" button.
Caution: If you are running Windows 2000/XP and a warning message
appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".
Note: After the installation, a message prompting you to restart your
computer may appear. In this case, click the "Yes" button to
restart your computer.
9) Make sure that the power of the machine is turned on, and then
connect the USB cable.
Windows will detect the machine and a Plug and Play screen will
appear.
Caution: If the following message appears on your computer screen,
close it.
A window regarding "HI-SPEED USB Device" will then
appear. Close the window.
This message appears when the machine's USB 2.0 mode is
not set to "HI-SPEED". For information on switching the USB
2.0 mode.
10) Follow the instructions in the plug and play window to install the
MFP driver.
Follow the on-screen instructions.
Caution: If you are running Windows 2000/XP and a warning message
appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".
Note: A "USB 2.0 Composite Device" installation window may appear
prior to this procedure. In this case, follow the instructions in the
window to install the USB 2.0 Composite Device.
This completes the installation of the MFP driver.
• If you installed Button Manager, set up Button Manager as explained
in "C. SETTING UP BUTTON MANAGER".
[Custom installation]
The procedure for a custom installation of the software is explained
below. Use the custom installation procedure when the machine is
connected by a parallel cable, when the machine is used as a shared
printer on a network, or when you wish to install the MFP driver, Button
Manager, or Sharpdesk separately.
(1) Windows XP (USB/Parallel)
1) The USB/parallel cable must not be connected to the machine.
Make sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and discon-
nect the cable.
Note: The cable will be connected in step 14).
2) Insert the CD-ROM into your computer's CD-ROM drive.
3) Click the "start" button, click "My Computer", and then double-click
the CD-ROM icon.
In Windows 98/Me/2000, double-click "My Computer", and then
double-click the CD-ROM icon.
4) Double-click the "setup" icon.
Note: If the language selection screen appears after you double click
the "setup" icon, select the language that you wish to use and
click the "Next" button. (Normally the correct language is
selected automatically.)
5) The "SOFTWARE LICENSE" window will appear. Make sure that
you understand the contents of the software license, and then click
the "Yes" button.
6) Read the "Readme First" in the "Welcome" window and then click
the "Next" button.
7) Click the "Custom" button.
8) Click the "MFP Driver" button.
To view detailed information on the software, click the "Display
Readme" button.
9) The "Welcome" window will appear. Click the "Next" button.
10) When you are asked how the printer is connected, select "Con-
nected to this computer" and click the "Next" button.
If you are using the machine as a shared printer on a network,
select "Connected via the network". For more information on this
setting, see "Using the machine as a shared printer".
Follow the on-screen instructions.
Caution: If you are running Windows XP and a warning message
appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway".
05̲UNPAC.fm 6 ページ ２００５年１１月１８日 金曜日 午後５時２９分
