Ÿ
MAINTENANCE indication
Example with maintenance request on zone (the dash
shows the zone out of the incoming event)
Note: the Led MAINTENANCE is on and there is the change of the
status of the related fault output (open/closed as for chosen
configuration)
Ÿ
Indication of problems on serial line
Example of loop interrupted. In this condition, the
Detector from 1 to 3 will continue to work on serial line B
(zone 1, 2 e 3). The Detectors related to zone from 4 to 8
will continue to work on serial line A. The dash will
indicated where the line is cut.
Note: Led TROUBLE is on and will be activated the output of zone 1.
Example of interruption of the loop between TX and RX
of zone (detector) 3. This message is shown only when
the line is cut between Transmitter and Receiver.
Note: the Led TROUBLE is on and if the line A is an open one all
the output of the detectors from 3 to 8 will be activated, if it is a
closet loop only the output 1 will be activated, and in any case the
system is still working.
Example with only one detector really connected and
system configuration with 8 Detectors or insulated in the
event of a short circuit after the first barrier in the open
line configuration and in the presence of bases with
guards.
Note: Led TROUBLE is on and will be activated the output of zone 1.
NOTICE: in all conditions above mentioned, in case of an alarm of one or more zone
(detector), the first line of the display will always show the alarm condition.
ENGLISH
The Unit that has isolated the short circuit is shown
on display with the message IsoTx, IsoRx or with
both the information
(as for the example)
in case of
TRx. The message will be complete with the number
of the corresponding detector.
Mod. MII
rev. 01
SETRONIC Verona
77
Example with fault on zone (detector) 2 e 6 (the dash
shows the zone out of the incoming event)
Note: the led TROUBLE is on and there is the change of the status
of the related output. (open/close and/or timing of delay as for
programmed configuration.
Ÿ
FAULT indication
Fault:-2---6--
Maint:----5---
A-Err:123-----
B-Err:---45678
A-Err:123-----
B-Err:--345678
C-Err:-2345678
Fault:-2345678
IsoTx:---4----
IsoRx:---4----
Содержание ILIA ERHSO712
