22
ENGLISH
Additional hight
The overall lamp head height can be lifted from 820mm - 1800mm by using four of the quicklock extension poles,
which store conveniently in the base of the SETO POWER LED. Simply slot and twist the poles together to create
a quick extension pole system. With the in-built stability legs this creates a unique compact self-contained tripod
system.
OPTIONAL EQUIPMENT
On board charging
The optional in-built in charging system gives the user the option of charging
from a 12 or 24V / DC vehicle system without the need for additional equipment
on the vehicle.
The unit has a bi-coloured LED to show the state of charging. A constant red LED
shows bulk charging where the majority of charge is fed into the battery, when the
red LED starts to flash this shows the battery is 80% charged, when the LED turns
to green the battery is then fully charged and ready to use. The charger only needs
a simple cable (included) from the vehicle to any one of the two multifunction
sockets on the rear of the SETO POWER LED.
The charger also employs a ‘vehicle battery protect system‘ which prevents over discharge of the main supplying
vehicle‘s battery. It detects when the vehicle alternator has started to charge the primery battery then starts to
charge the SETO POWER LED.
Once the alternator stops charging the vehicle battery, the SETO POWER LED charger will continue till end of
charge or until it sees the voltage of the primery supplying battery fall to a point. It then terminates charge to the
SETO POWER LED to prevent further discharge which could cause the vehicle not to start. The on board vepac
charging system can also be configured to ignore the, vehicle battery protect system‘, please confirm this at point
of ordering. This may be useful when a permanent 12-24V DC supply is available or where the supplying batteries
have more than enough capacity to cope with a full recharge of the SETO POWER LED.
In addition the in built charger can measure the batteries ambient temperature and adjust the charging profile to
suit. This unique process ensures the battery is charged to full capacity even when used in temperatures outside
the normal 25°C for 100% capacity.
