background image

23

ENGLISH

Remote Control

The optional remote control system allows operation of all functions of the SETO POWER 

LED from a distance of up to 100 metres. In addition as each command is given the LED 

on the remote will show the status of the SETO POWER LED battery, the battery status can 

also be seen without changing a function by pressing the top two buttons on the remote 

simultaneously.

As a button is pressed you will hear a bleep from the remote, then a second one as confir-

mation that the action has been received and processed.

The remote control system uses mesh networking technology to control multiple SETO 

POWER LED units. Each unit receives a command and sends it to the next unit. This expands 

the effective range and eliminates missed attempts.

Emergency System

The emergency system is based on the same technology as the remote control this simple    

“plug in the wall“ (or any 110V to 240V AC generator power source) will monitor the power  

then automatically broadcast a signal to all SETO POWER LED to switch them on in a mains 

failure situation. This simple but effective solution makes a very versatile, wireless portable 

emergency lighting system.

STORAGE

If the SETO POWER LED is to be left unused for an extended 

period of time or the unit is to be put into storage we ad-

vise you fully recharge the battery and disconnect the light 

head plug from the battery unit to prevent any accidental 

switch on. The unit can then be stored up to  six months 

without having to recharge. Before the device is used again, 

it should be fully charged.

MAINTENANCE

The SETO POWER LED should need little or no maintenance during its life span other than periodic cleaning of 

the exterior surfaces where we suggest using a light detergent and water to sponge off any dirt deposits. Should 

you encounter a problem then please contact us for technical assistance. We suggest the unit be returned to us 

for any problems that can’t be rectified by telephone. Please note there are no user serviceable parts inside and 

that a competent person must carry out any repairs.

RECYCLING

This product is powered by a lead-acid battery and must not be disposed with the regular household waste but 

has to be delivered at a collection point for the recycling of electrical and electronic equipment. The symbol on the 

product, the manual instruction or the package indicates it. With the recovery of used products you make an im-

portant contribution to protect our environment. Please ask the local authorities for the appropriate disposal site.

!

ATTENTION

!

STORE THE LIGHT ONLY IN

CHARGED STATE !

Must be charged every 6 months.

Deep discharge may damage the battery and cause it to malfunction. 

Содержание POWER LED





























Отзывы: