18
ENGLISH
OPERATION - ADVANCED FEATURES
To use the unit simply press th on button and the light will come on to 100% power / brightness and is ready for
use. The additional buttons listed below allow other features to be accessed:
(Button 1)
Used for switching the unit either ON or OFF. Note that after switching off allow a few seconds before switching
back on to allow the system to shut down and restart as it checks its battery status.
(Button 2/3/4)
Used to put the light into different profiles as listed above. Switch on the unit (button 1), select a mode (button 2),
then select brightness (button 3), and next select a channel (button 4) as required.
In addition you can mix and match modes between the two channels, for example you can switch on (button 1),
select a brightness (button 3), select a channel (inner for example, button 4) then select a mode (button 2, SOS 2nd
press). Next select a channel (button 4, outer for example), then select a mode (button 2, flashing or static) then
select the channel (button 4) to bring both channels on to create different light options.
Pressing and holding the „Brightness“ button allows dimming up and down regardless of what brightness mode
the unit has been set at.
Battery Status
(Button 1) = ON/OFF
(Button 2) = MODE -
Flashing, SOS, Alternate flashing
(between inner and outher LED arrays)
(Button 3) = BRIGHTNESS - 8%, 25%, 50%, 75%, 100%, 125%
(Button 4) = SELECT - inner, outer, both
