LE/LE-HC Series DVR User Manual
V1.4 October 2006
- 33 -
Playback with IR Controller
Press “Menu” then use the Up/Down buttons to
select “Playback” (Figure 5.2). Pressing the
“Right” button will display
Error! Reference
source not found.
27. Pressing the Menu
button again will display the Playback Menu
(Figure 5.28).
Search by Time/Search by Event
Select Search by Time or Search by Event to search
video recordings. Use the “Up” and “Down” buttons to select the required time frame. Press the
“Right” button to view the selected file in the Playback Screen (Figure 5.29).
On the playback screen, push the menu button to bring up
the Playback Menu, shown in Figure 5.30.
Use the “Up” or “Down” buttons to select “Search by Time”,
press the right arrow key or OK key and choose a date
and time. Or select “Search by Event”, press the right
arrow key or OK key and choose an alarm device (GPI) or
Motion Camera (Motion) using the right and left arrow keys. Choose a “From” date and a “To” date
and time using the Up/Down keys to position the cursor and the left/right keys to change the
parameter. Press OK to search and play the associated video if searching for GPI based
recordings.
If searching for Motion based recordings, press OK to bring up the “Set Search Area” Screen. This
powerful feature allows searching by camera for motion in just a portion of a camera field of view
(e.g. a doorway). The default is the whole area is disabled for motion. Select “Enable all Area” if all
the field of view is to be searched for motion, otherwise use the Set Area item. Move the cursor
using the arrow keys, to the top left section of the area to be searched and press OK. Move the
cursor over the area to be searched, pressing OK after each move. The selected area will be
highlighted in red. Press Search to search the recordings for motion in the selected area during
the time frame selected.
Figure 5.29
Figure 5.28
Figure 5.30
Figure 5.27
