Sentry LE Series, Руководство пользователя

Страница: 17 / 65

LE/LE-HC Series DVR User Manual
V1.4 October 2006
- 16 -
Set Names & On Screen Display (Figure 4.12)
The “Set Names of Server and Cameras” option allows
users to change the name of the server and the camera
names.
Use the “Set Overlay Text” to show text on the camera
image. Check the enable box to make it appear on the
screen and set the X and Y parameters (X being horizontal
and Y being vertical) to assign a specific position (default is
upper left hand corner).
Additionally a time stamp can be configured, per camera
with the “Set Time Stamp” and give a format for the date by
selection from the pull-down menu labeled “Timestamp Date
Format.”
h) Set User’s Authority
(Figure 4.13)
Setting the User’s Authority allows the administrator to configure users to have specific privileges
defined by login credentials.
Simply enter a user name and password for the user and then configure
the desired privileges for that user.
Below the box is a URL marked Users Listing which gives a list of all the
users on the DVR.
i) DVR Setup
DVR Setup Defines whether the LE/LE-HC Series DVR will record based
on a first-in first-out recording process, oldest video getting deleted to
make room for new video (circular recording) or if it will stop when the drive is full (Auto Stop).
j) Record Schedule
Multiple schedules can be set up to accomplish specific
recording requirements at pre-determined times. This would
allow maximum usage of hard drive capacity, for instance
recording on motion when a store is closed and recording full
time when the store is open. Use the pull-down menu at the top
of the screen in Figure 4.14 to select the schedule to edit.
There can be a maximum of 16 schedules on any one DVR at
any one time.
Schedule 1 is set by default to be on all the time. Unlike most
traditional DVRs the LE/LE-HC Series DVR uses a schedule all
the time. Care must be taken not to overlap schedules. Use
Figure 4.12
Figure 4.13
Figure 4.14