LE/LE-HC Series DVR User Manual
V1.4 October 2006
- 24 -
Compression Boost
Select “None”, “Low”, “Medium” and “High”. The higher compression
boost, the lower the quality of recorded and transmitted video but the
faster remote frame rates.
Auto Gain Control
Set “Yes” to enable auto gain control for this camera.
Mirror Horizontally
Mirror the selected camera video horizontally.
Mirror Vertically
Mirror the selected camera video viewing vertically
Max Connection
Limit the maximum number of remote connections allowed to access
(for this camera)
this camera.
Max Bandwidth
Limit the total maximum bandwidth in Bytes/second
(for this camera)
allocated for accessing this camera
Max Conn. Bandwidth
Limit the maximum bandwidth allocated to each remote connection of
this camera.
Dimension
Set frame size to 320x240 or 640x480 pixel resolution
Watermark
Turn Watermarking on/off (only with MJPEG compression)
Local Display
Turn local display on/off for this camera. Display off allows the camera
to be recorded without live display
PTZ Control
Use the right arrow button
to bring up Figure 5.6.
PTZ Device
Use the left/right buttons on the controller to select the correct Device
Type/ Control Protocol.
PTZ ID
Set the ID number to be the same as the camera ID (from 0 to 255)
with the left/right buttons
Baud Rate
Set the Baud Rate to be the same as the camera baud rate setting.
Timeout (sec)
Sets the maximum time that a remote user can control the PTZ
Devices. Only one user can control the cameras at any given time.
Once the timeout has been reached, if another user is requesting PTZ
access, then access will be denied to the first user, and granted to the
second.
Figure 5.6
