LE/LE-HC Series DVR User Manual
V1.4 October 2006
- 10 -
Chapter 4: Using and Configuring the LE/LE-HC Series DVR
Remotely
First Connection to LE/LE-HC Series DVR
Once the LE/LE-HC Series DVR is installed on the network, use
another Windows© based machine on the network and try to
connect to the LE/LE-HC Series DVR -accomplished by opening
up a browser and entering in the address bar
http://192.168.10.10
(or the configured IP address for the LE/LE-HC Series DVR)
A window should pop up looking like figure 4.1. Note that the IP
may differ depending on what was configured. The default
Administrator name is “admin” and the password is
“sentry”. This will allow remote access to the LE/LE-HC
Series DVR.
To view live video from a LE/LE-HC Series DVR
remotely, a Live Video Active X Component is required.
If the Active X Component has never been installed, or a
previous version is on the remote machine, a window will
pop up which requests downloading LVSETUP.EXE (see
figure 4.2).
Configuration of LE/LE-HC Series DVR
When connecting to The LE/LE-HC Series DVR from a remote PC, the web browser display will
be Figure 4.3.
Figure 4.3
Figure 4.1
Figure 4.2
Playback recorded files
System Setup
The Surveillance Screen Panel
enables the definition of the number
of camera images displayed on
screen.
