manualshive.com logo in svg

Sensors & Software Noggin 100, Руководство пользователя


Поделиться
Скачать
background image

Noggin

Appendix C - GPR Emissions, Interference and Regulations

C-7

C-3

Industry Canada Regulations - English

Industry Canada published it regulations for ground penetrating radar (GPR) on Mar 29 2009 as part of the
RSS-220  titled  'Devices Using Ultra-Wideband (UWB) Technology'.

Industry Canada has made a unique exception for GPR by not requiring user licensing.  The user does
have to comply with the following directives:

(1) This Ground Penetrating Radar Device shall be operated only when in contact with or within 

1 m of the ground.

(2) This Ground Penetrating Radar Device shall be operated only by law enforcement agencies, 

scientific research institutes, commercial mining companies, construction companies, and 
emergency rescue or firefighting organizations.

Should the ground penetrating radar be used in a wall-penetrating mode then the following restriction
should be noted by the user:

(1)  This In-wall Radar Imaging Device shall be operated where the device is directed at the wall 

and in contact with or within 20 cm of the wall surface.

(2) This In-wall Radar Imaging Device shall be operated only by law enforcement agencies, sci-

entific research institutes, commercial mining companies, construction companies, and emer-
gency rescue or firefighting organizations.

Since operation of GPR is on a licence-exempt basis, the user must accept the following:

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device. 

Règlement d'Industrie Canada - Français

Industrie Canada a publié des règlements pour les appareils géoradar (GPR) le 29 mars 2009, dans le
cadre du RSS-220 intitulé "Dispositifs utilisant la bande ultra-large (UWB)".

Industrie Canada a faite une exception unique pour GPR en n'exigeant pas de licence par utilisateur. L'util-
isateur doit se conformer aux directives suivantes:

(1) Ce géoradar périphérique doit être utilisé que lorsqu'il est en contact avec ou moins de 1 m 

du sol.

(2) Ce géoradar périphérique doit être utilisé que par les organisations d'application de la loi, les 

instituts de recherche scientifique, des sociétés minières commerciales, entreprises de con-
struction et de secours d'urgence ou des organisations de lutte contre les incendies.

Si le géoradar est utilisé dans un mode de pénétration au mur, la restriction suivante est à noter par l'utili-
sateur:

(1) Ce dispositif d'imagerie radar doit être utilisé lorsque l'appareil est orienté vers le mur et en 

contact avec ou dans les 20 cm de la surface du mur.

(2) Ce dispositif d'imagerie radar doit être utilisé que par les organisations d'application de la loi, 

les instituts de recherche scientifique, des sociétés minières commerciales, entreprises de 
construction et de secours d'urgence ou des organisations de lutte contre les incendies.

Содержание Noggin 100



































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Noggin 100

Harbor Freight Tools 94670 Assembly & Operating Instructions preview
94670
Бренд: Harbor Freight Tools Страницы: 11
C. Crane CC GOZO Instruction Manual preview
CC GOZO
Бренд: C. Crane Страницы: 3
Radio Shack 1201850 User Manual preview
1201850
Бренд: Radio Shack Страницы: 12
Midland Syn-Tech II Operator'S Manual preview
Syn-Tech II
Бренд: Midland Страницы: 7
Vertex Standard VX-4500 Series Operating Manual preview
VX-4500 Series
Бренд: Vertex Standard Страницы: 32
Motorola M11UGD6CB1_N Service Manual preview
M11UGD6CB1_N
Бренд: Motorola Страницы: 87
Motorola pro7100 User Manual preview
pro7100
Бренд: Motorola Страницы: 60
Daewoo DRP-100 User Manual preview
DRP-100
Бренд: Daewoo Страницы: 2
Velex VX600D Instruction Manual preview
VX600D
Бренд: Velex Страницы: 12
Shuman MC-267 User Manual preview
MC-267
Бренд: Shuman Страницы: 19
Hama DR350 User Manual preview
DR350
Бренд: Hama Страницы: 16
Koden MDC-2200 series Installation Manual preview
MDC-2200 series
Бренд: Koden Страницы: 123
GE MDS TD220X Manual preview
TD220X
Бренд: GE MDS Страницы: 48
Electrohome EU155Y User Manual preview
EU155Y
Бренд: Electrohome Страницы: 12
K40 CALIBRE Specifications preview
CALIBRE
Бренд: K40 Страницы: 2
Hama 00054236 Quick Manual preview
00054236
Бренд: Hama Страницы: 102
Tait TOP Operation And Service Manual preview
TOP
Бренд: Tait Страницы: 64
Wörlein Soundmaster SCD5100 Series Instruction Manual preview
Soundmaster SCD5100 Series
Бренд: Wörlein Страницы: 57

Бренды по названию

Популярные бренды

Загрузить еще бренды