Putting the conference system into operation
18
If you are using cable holders (see previous chapter):
왘
Choose a suitable cover
for the cable holder
:
왘
Affix the covers
as shown.
왘
Slightly tighten the supplied screws
(approx. 0.05 Nm).
To connect the conference units to the central unit:
왘
Use a system cable to connect the
IN
socket
of the first conference unit to
the
PORT II
socket
or
PORT I
socket
of the central unit (see above).
왘
Use a system cable to connect the
OUT
socket
of the first conference unit
to the
IN
socket
of the second conference unit.
왘
Repeat these steps for the remaining conference units.
Cable
Cable holder cover
SDC CBL RJ 45 system cable
marked “
M
”
Highly shielded cable
marked “
L
”
IN O
UT
IN O
UT
CAUTION
Product damage due to an unsuitable power supply!
An unsuitable power supply can damage network devices with RJ 45
plugs that are connected to the connection sockets
PORT I
and
PORT II
.
왘
Only connect ADN C1 and ADN D1 conference units to the connec-
tion sockets
PORT I
and
PORT II
.
Please note that there is a limited number of approx. 15 conference units
per cable string due to the voltage drop on the cable string (see page 13).
IN –– AUDIO –– OUT
PORT II PORT I
100-240V~
50/60Hz 240W
2x 52.8V
1.75A
IN OUT
IN OUT
IN OUT
8
9
8
9