Sennheiser ADN, Инструкция по эксплуатации, Страница: 24 / 121

23
Configuring the conference system via the central unit
Display Function of the menu item Option/display Page
“Main Menu”
“ Conference ” Calls up the “ Conference ” submenu – 26
“ Audio ” Calls up the “ Audio ” submenu – 31
“ System ” Calls up the “ System ” submenu – 34
“ Languages ” Adjusts the language “ Deutsch ”, “ English ”,
“ Espanol ”...
41
“ Settings ” Calls up the “ Settings ” submenu –
“Conference” menu
“ Conference
Mode ”
Adjusts the conference mode “ Direct Access ”,
“ Override ” or “ Request ”
26
“ Microphone
Limit ”
Sets the maximum number of speakers who can take the
floor simultaneously in “
Direct Access ” and “ Override ” mode
“ 1 ” ... “ 10 ” 27
“ Request Limit ” Sets the maximum number of requests to speak in “ Request ”
and “ Direct Access ” mode
“ 0 ” ... “ 10 ” 28
“ Talk Time Status ” Activates/deactivates the speaking time limit “ On “/“ Off ” 28
“ Talk Time Limit ” Sets the speaking time limit “ 01 ” ... “ 60 ”
in steps of 1 minute
28
“ Premonition Time
Limit ”
Sets the advance warning time (warns speakers that they
are approaching the end of the individual speaking time) “ 00 ” ... “ 120 ”
in steps of 10 seconds
28
“ Reaction on
Talktime Exceed ”
Determines the behavior when the individual speaking time
is exceeded “ Continue “/“ Cancel ” 29
“ Blink on Request ” Activates/deactivates the flashing of the signal light ring
when a request to speak is made
“ On “/“ Off ” 30
“ Re-Init ” Re-initializes the conference units “ Yes “/“ No ” 30
“ Clear Request List
on Cancel ”
Sets the function of the priority key of the chairman unit
“ On “/“ Off ” 30
“Audio” menu
“ XLR Out ” Calls up the “ XLR Out ” submenu – 31
“ XLR In ” Calls up the “ XLR In ” submenu –
“ Floor/
Loudspeakers ”
Calls up the “ Floor/Loudspeakers ” submenu –
“ Audio Gain
Reduction ”
The sum signal of all active conference units is output via
the floor channel (“
Floor/Loudspeakers ”). The “ Audio Gain
Reduction ” menu item allows you to adjust how the volume
levels of the signals of the individual conference units are
processed.
“ 0.0 dB per Mic ” ...
“
−
3.0 dB per Mic ”,
“ Linear Division ”
32
“XLR Out” menu
“ XLR Out Status ” Activates/deactivates the OUT audio output “ On “/“ Off ” 31
“ XLR Out Volume ” Adjusts the volume of the XLR output
“ 01 ” ... “ 32 ”
“ XLR Out
Equalizer ”
Adjusts the tone color of the XLR output
“
−
12 dB ” ... “ +12 dB ”
+02 dB
–03 dB
+05 dB