95
Using the “Conference Manager” software
Using the OUT audio output/IN audio
input and setting the tone color
To activate/deactivate the OUT audio output/IN audio input:
왘
Tick/untick the “
Audio XLR
out
“/ “
Audio XLR In
” check box.
The OUT audio output/IN audio input is activated (check box is ticked) or
deactivated (check box is unticked).
To set the volume of the OUT audio output/the sensitivity of the IN audio input:
왘
Move the “
Volume
“/ “
Sensitivity
” slider ...
... upwards to increase the volume/sensitivity or
... downwards to reduce the volume/sensitivity.
The volume/sensitivity is changed immediately.
왘
Set the sensitivity of the IN audio input so that the audio signal is not overmod-
ulated at maximum input volume (see page 31).
To set the tone color of the OUT audio output/IN audio input:
왘
Move the “
EQ low
”, “
EQ mid
” or “
EQ high
” sliders to change the tone color.
왘
Click “
OK
”.
Your settings are saved and the “
Audio Settings
” window closes.
Resetting the audio settings
To reset the audio settings for the floor channel, the IN audio input and the OUT
audio output to the factory default settings:
왘
Click the “
Set default
” button.
All sliders are reset.
Controlling and monitoring a conference –
“Live” operating mode
In “Live” operating mode, you can:
•
control a conference from the screen,
•
use either the Room View window or the Delegate View window for controlling
the conference,
•
use the graphical/photographical representations of the conference room that
you created in “Setup” operating mode,
•
– with a mouse click – grant or withdraw speaking privileges to/from individual
conference units,
•
monitor speaking privileges.
Switching to “Live” operating mode – starting/ending a conference
Preparing and starting a conference
왘
Load a conference configuration (see page 68).
Or:
왘
Prepare a conference in “Setup” operating mode (see page 72).
왘
Click the “
Live
” button.
The “
Save Conference
” window appears, allowing you to save the configuration
on the central unit.