SL320003270 Ed 03_EN
8
Fridge door open ICON
Wrong cylinder mix loading ICON
Manual defrost requirement ICON
Machine WASH requirement ICON
3. Safety
3.1. General safety guidelines
• Read the entire instruction manual carefully.
• The connection to the electrical power supply must be done
according to the safety standards of the country of use.
• The power supply where the machine will be connected,
must:
- Conform with the type of plug installed on the machine.
- Have dimensions as described on the data plate located on
the machine.
- Be connected to an efficient earthing.
- Be connected to a differential circuit breaker installation.
• The power supply cable should not:
- Come into contact with any kind of liquid: risk of electric
shock and/or fire.
- Be squashed or come into contact with sharp edges.
- Be used to move the machine.
- Be used if damaged.
- Be handled with wet or damp hands.
- Be rolled up while the machine is in operation.
- Be manipulated.
• It is forbidden to:
- Install the machine in ways that are different to those
illustrated in Ch. 5.
- Install the machine in areas exposed to jets of water.
- Use the machine near flammable and/or explosive
substances.
- Leave plastic bags, polystyrene, nails etc., at the reach of
children, as they are potential sources of danger.
- Let children play or be in the vicinity of the machine.
- Use replacements that are not approved by the
manufacturer.
- Introduce any kind of technical modification to the machine.
- Submerge the machine in any kind of liquid.
- Wash the machine using jets of water.
- Use the machine for any means other than those described
in the manual.
- Use the machine while under the influence of drugs, alcohol,
psychoactive drugs, etc.
- Install the machine on top of other apparatuses.
- To use the machine in potentially explosive or corrosive
environments or with a high concentration of dust or oily
substances suspended in the air.
- To use the machine in environments subject to fire risk.
- To use the machine to elaborate substances that are not
suitable for the machines characteristics.
• Do not wash the machine using gasoline or any kind of
solvents.
• Repairs should be performed solely by a Support Centre
which has been authorized by the Manufacturer and always by
specialized and trained personnel.
• Do not obstruct the vents situated on the sides of the
machine.
• Do not place the machine near heating systems (such as a
heater or radiator).
• In the case of fire use carbon dioxide (CO2) extinguishers.
Do not use water or powder extinguishers.
In case of improper use all guarantees
becomes invalid and the manufacturer
accepts no liability for material and/or
personal damage.
The following is considered as improper use:
- Any use and/or technical application different to those which
are illustrated in this manual.
- Any machine intervention that contradicts the instructions of
this manual.
- Any use after the manipulation of components and/or
alteration of safety devices.
- Any use after repairs made with components not authorized
by the manufacturer.
- The outdoor installation of the apparatus.
3.2. Stop functions
The machine's stop functions are controlled by the main switch
located on the right hand side of the machine which cuts off
the power supply to the machine entirely.
3.3. Plates
NONE OF THE PLATES PRESENT ON THE MACHINE
SHOULD BE REMOVED, COVERED OR DAMAGED,
ESPECIALLY THOSE WHICH ARE USED FOR SAFETY.
4. MOVING AND STORAGE
All operations described in Chapter 4 are to be
exclusively performed by specialized
technicians, including the elevation and
movement operations for packaged and non-
packaged machines. These operational
sequences must be planned depending on the
characteristics and weight of the object to be
moved, using suitable means which respect the
regulations applicable for the material in
question.
