EN
47
commeo commissioning/setting by radio
If multiple receivers have been found, the selected receiver can be changed by pressing the
SELECT button for 1 second. The next receiver makes a short confirmation run. Only one
receiver can be selected at one time for moving, setting and programming it.
SELECT 3 s
Power interruption/
programmed transmitter
SELECT mode
SELECT 1 s
SELECT 1 s
SELECT 1 s
SELECT 1 s
Receiver 3
Receiver 2
Receiver X
Receiver 1
Exit SELECT mode
3 s
To exit SELECT mode (the status LED slowly flashes orange), press the
SELECT button for 3 seconds.
Status LED indicator on the transmitter for the various operating modes
Transmitter mode
Status LED indicator
Operation mode
Lights up when a button is pressed
SELECT mode
Slowly flashes orange
CONFIGURATION mode
(only for authorised qualified personnel),
see 5.2.7.
Slowly flashes green or red
