Selve Breeze-com SE 2/10, Руководство по эксплуатации

Страница: 35 / 152

EN
35
Table of contents
Dear customer,
By purchasing a SELVE drive, you have chosen a quality product from SELVE. These operating
instructions describe how to install and operate the drive. Make sure to read these operating
instructions before initial operation of the SELVE drive and adhere to the safety instructions.
SELVE is not liable for changes to norms and standards after publication of this document.
Subject to technical modifications.
1. Safety information ________________________________________________________ 32
2. Information about the drive features _________________________________________ 37
2.1. Intended use _________________________________________________________ 37
2.2. Characteristics ________________________________________________________ 37
2.3. SELVE-commeo-radio __________________________________________________ 37
3. Installation and electrical connection _________________________________________ 38
3.1. Installation of the drive into the shaft _____________________________________ 38
3.2. Supporting the drive ___________________________________________________ 39
3.3. Assembly and disassembly of the connector cable ___________________________ 40
3.4. Electrical connection __________________________________________________ 40
4. Setting the end positions ___________________________________________________ 41
4.1. Delivery state ________________________________________________________ 41
4.2. Setting options _______________________________________________________ 41
4.3. Mechanical requirements _______________________________________________ 41
4.4. Selection table for settings ______________________________________________ 41
4.5. Setting the end positions with setting switch/switch _________________________ 42
4.5.1. Semi-automatic setup mode WITH relief _____________________________ 43
4.5.2. Semi-automatic setup mode WITHOUT relief __________________________ 44
4.5.3. Manual setup mode WITHOUT relief _________________________________ 45
5. commeo commissioning/setting by radio _____________________________________ 46
5.1. Selecting a receiver ____________________________________________________ 46
5.2. Functions with one selected receiver _____________________________________ 48
5.2.1. Semi-automatic setup mode WITH relief _____________________________ 49
5.2.2. Semi-automatic setup mode WITHOUT relief __________________________ 50
5.2.3. Manual setup mode WITHOUT relief _________________________________ 51
5.2.4. Programming/deleting transmitters _________________________________ 52
5.2.5. Deleting the transmitter table in the receiver __________________________ 52
5.2.6. Resetting the receiver to the factory settings __________________________ 52
5.2.7. CONFIGURATION mode (only for authorised qualified personnel) _________ 52