EN
57
Setting the wind sensitivity
6.3. Displaying and changing the set wind sensitivity with the commeo Multi Send
Requirement: The SE Breeze-com has already been programmed in the commeo Multi Send.
Select “Devices” in the main
menu with or and jump
to the next menu with
.
Select the appropriate
commeo drive with or .
The commeo drive confirms
the selection with a brief up
and down movement. Jump
to the next menu with the
STOP button.
Select the device parameters
with or and then press
the STOP button.
Confirm the “Wind sensitivi-
ty” parameter with
.
Set the required wind sensi-
tivity as level 1 to 5 with the
channel selection buttons
or . The wind sensitivity is
switched off with the “OFF”
setting. Press
to con-
firm.
Confirm the response with
and then return to the
main menu or the start menu
by repeatedly pressing
.
