58
7. Switching the fabric tightening function on and off
The “Tightening” function is switched off in the delivery state or after a works reset. The
“Tightening” function can only be switched on or off from the configuration menu in the
commeo Multi Send.
Note: • The fabric tightening function is executed about 6 seconds after reaching the lower
end position. Any last vibrations caused by the movement of the awning fabric while
the awning is being extended should then have subsided.
• Even when the fabric tightening function is switched on, the lower end position is dis-
played as being 100% fully extended in the visualisation in the commeo Multi Send
and the commeo Home Server.
3 s
The handheld transmitter must first have been set to SELECT
mode. To do this, press the SELECT button for 3 seconds and
select the appropriate SE Breeze-com.
The commeo Multi Send is in
SELECT mode.
Search for the required
device by pressing the
SELECT button several times.
Jump to the next selection
menu with
.
Select the “Configuration”
parameter with or and
confirm with
.
Select the “Tightening” func-
tion with or and use the
channel selection buttons
or to switch the tightening
function on or off. Then press
to save the setting.
= switched off
= switched on
Press
to confirm.
Switching the fabric tightening function on and off
