
80
10 TROUBLE SHOOTING
DANGER!
• Never connect the device to the power supply if the device, the
power cord or the mains plug are visibly damaged.
• In case of danger or in case of a defect, remove the mains plug
immediately from the socket.
• Never try to repair the device yourself. If your device does not work
properly, contact the dealer from where you purchased the device.
• If the power supply cord is damaged it may only be replaced by
the manufacturer or by a manufacturer-authorized after-sales
service or by a qualifi ed specialist (electrical engineer) to avoid
hazards.
• Never operate a defective device.
• Never operate a device that has fallen down.
If failures occur during operation, please check the following table to see if you can solve
the problem yourself. All other repairs are prohibited and the warranty is void.
Problem
Reason
Action
Device will not start.
Device is not connected
with power supply.
Plug the power plug into a
socket outlet with earthed
contact.
The fuse is blown.
Replace the fuse or reset
the interruption to the power
supply.
Socket is defective.
Check the socket by connec-
ting it with another device.
The device does not heat up. The dooris not closed.
Close the door.
Rotary plate makes noises. Dirty rolls.
Rotary plate is not inserted
correctly.
Clean roll ring.
Insert rotary plate correctly.