manualshive.com logo in svg

SEF 548.04, Руководство по эксплуатации

Поделиться
Скачать
SEF 548.04 Скачать руководство пользователя страница 95

6.0 Production

Page 6.7

Production for 548.04 \ 05.2010 \

If a circuit board remained inside the system, e.g. got stuck in 
the conveying system, you can open and close the system cover 
and the cover of the heating chamber.

Attention, danger of burns

During the production process, the heating chamber is very 
hot due up to 525°C (980 °F). In case of burns contact a 
physician immediately.

Attention, danger of burns

Before you remove a circuit board from inside the sy stem, 
make sure you wear heat-resistant gloves. The circuit 
board may be very hot and cause burns.

 

Turn the re

fl

 ow system off by the main switch.

 

Let the re

fl

 ow system cool down.

 

Unsecure the machine cover with the 4-key.

 

Open the machine cover with the heating chamber.

 

Remove the circuit board carefully from the open hea-
ting chamber.

 

Close the machine cover with the heating chamber.

 

Secure the machine chamber.

 Open Covers

 Close Covers

The  circuit board remained inside the system

Содержание 548.04







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды