manualshive.com logo in svg

SEF 548.04, Руководство по эксплуатации

Поделиться
Скачать
SEF 548.04 Скачать руководство пользователя страница 15

Page 1.3

1.0 Preface

Preface for 548.04 \ 05.2010 \

 Introduction

Dear User

This operating and maintenance manual (further just referred to 
as operating manual) has been written for the authorized user. 
Basic knowledge in SMD soldering methods are assumed. This 
operating manual contains important information on how to ope-
rate your Re

fl

 ow-System properly and safely.

The Re

fl

 ow-System has been developed and constructed 

according to the latest technology. It was tested for proper func-
tioning prior to delivery. Nevertheless, if not used properly, users 
or third parties or the Re

fl

 ow-System itself and other 

tangible assets might be damaged.

It is absolutely necessary that you read this operating manual 
prior to transporting, mounting or operating the Re

fl

 ow-System. 

Therefore, use the Re

fl

 ow-System only in proper con di ti on, 

according to the rules, being aware of possible safety pro blems 
and hazards, and under consideration of all in for ma ti on 
provided in this operating manual.

This operating manual contains rules and guidelines regarding 
the speci

fi

 c use of the Re

fl

 ow-System. Only the absolute com-

 pliance with these instructions is considered to be the ag reed 
use. The user is liable for any risks arising from other uti li za ti on 
or application of the system than the one it is intended for.

For further questions regarding the Re

fl

 ow-System or to order 

spare parts, please contact us.

You can reach us under

Phone:  

0049 - 4136 / 909-0

Fax: 

     0049 - 4136 / 909-22

Содержание 548.04







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды