manualshive.com logo in svg

SEF 548.04, Руководство по эксплуатации

Поделиться
Скачать
SEF 548.04 Скачать руководство пользователя страница 27

Page 2.5

2.0 Safety Instructions

Safety Instructions for 548.04 \ 05.2010 \

 Remaining risks

Remaining risks are not obvious risks caused by the system . 
Even though, the system has been designed and constructed 
according to the latest technology and the generally recognized 
rules regarding technical safety, remaining risks can not be com-
pletely excluded, even if the system is used properly.
Therefore, operate the system only in perfect technical conditi-
on, with awareness to your safety and possible health hazards 
as well as in compliance with the accident prevention regulati-
ons, the corresponding technical safety regulations, the relevant 
environmental directives, and the instructions regarding moun-
 ting, operation, maintenance and repair.

The operating personnel must be informed, quali

fi

 ed, and trai-

 ned possessing suf 

fi

 cient know ledge due to their education 

and ex pe ri ence in a special 

fi

 eld and are familiar with the cor-

 re spon ding relevant regulations on industrial health and safety 
stan dards as well as on accident prevention. They are also 
familiar with the generally recognized technical rules. Only such 
persons are allowed to mount, dis mount, start ope ra ti on, do 
maintenance work and operate the system.

Protective clothing is a personal protection equipment protec-
ting the body against remaining risks resulting from the working 
process. The owner is responsible for the use of personal pro-
 tec tion equipment complying with the law of unit safety.
The relevant accident prevention provisions stipulate for each 
activity or the working place, resp., under which circumstances 
personal protection equipment has to be worn.

For example:

 

  

Heat-resistant gloves

 when working at  

  

 

 

  the 

hot

 heating chamber.

 Operating 
personnel 

 Protective clothing

 De

fi

 nitions

Содержание 548.04







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды