manualshive.com logo in svg

SEF 548.04, Руководство по эксплуатации

Поделиться
Скачать
SEF 548.04 Скачать руководство пользователя страница 127

Page 9.13

9.0 Maintenance

Maintenance for 548.04 \ 05.2010 \

Caution, Danger for your life

In the system there are some parts with mains power. By 
mainte nance and ser vice pro ce du res turn the entire 
system off, shut off from mains by re mo ving the mains 
plug. There is danger for your life.

Danger of burns

Start working after the system is cooled down.

You recognize a defective heat sensor, when the displayed 
temperature shows either 0°C or 558°C. 

1.  

  Turn the entired system off, shut off from mains by 

removing the mains plug.

2.

 

First let the machine cool down before you start wor-
king in the machine.

3.

 

Open the covers by hand.

4. 

Secure the covers against accidently falling down.

5. 

   Lift the front panel up and place it upside down on the 

cover area.

6.   

Remove the thermo cable from front panel.

7.

 

Disconnect the mounting clamp of the temperature 
sensor. 

8. 

You can now remove careful the temperature sensor.

9. 

Disconnect the lustre terminal of the defective sensor 
form the power unit.

 Change the 
 temperature 
sensor

Содержание 548.04







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды