Sea Tel 4009-9 BROADBAND-AT-SEA, Руководство по установке

Страница: 44 / 153

4009-9 Installation Manual Basic Setup of the ACU
4-2
POL TYPE 72
Setup – Optimizing Polarity
& Cross Pol Isolation
POL OFFSET 40
POL SCALE 90
AZ LIMIT 1 0
Setup – Blockage & RF Radiation Hazard Zones
AZ LIMIT 2 0
EL LIMIT 12 90
AZ LIMIT 3 0
AZ LIMIT 4 0
EL LIMIT 34 90
AZ LIMIT 5 0
AZ LIMIT 6 0
EL LIMIT 56 90
5v OFFSET 0 Leave at factory Defaults
5V SCALE 0 Leave at factory Defaults
TX POLARITY 2 (Horizontal TX) Setup – Optimizing Polarity
& Cross Pol Isolation
TRACK DISP 130 or 170 Setup – Band Selection
* This parameter value is for use with iDirect satellite modems to provide Modem Lock input
& Modem TX Mute functions. Refer to Setup – Modem Connect, Setup and Test for values
for some other common Satellite Modems and other SYSTEM TYPE parameter information.
REMOTE PARAMETER 4009 5009 6009 Optimize using Lesson
MK2 PCU & Advantech 4W BUC
Configuration Number N0xxx
DishScan Phase/Gain N7xxx
002
026
Home Flag Offset N6xxx 000 Setup – Home Flag Offset
4.4. Save New Parameters
Parameters that have been changed are only temporarily changed until they are SAVED. If changes are made and
not stored, they will still be effective but will be lost when power is removed or the RESET key is pressed.
Simultaneously press, and quickly release the LEFT and RIGHT arrow keys to access “SAVE NEW PARAMETERS”
directly from any other menu display. Verify that the change(s) you have made is/are correct and then select
“SAVE NEW PARAMETERS”. Press UP arrow and then ENTER to save any recent changes into the ACUs NVRAM
for permanent storage.