Sea-doo GTX Limited iS 255 2009, Руководство по ремонту

Страница: 530 / 555

Section 07 BODY AND HULL
Subsection 03 (HULL)
smr05-005-001_A
1. Elbow fitting holes
DRAIN PLUGS
NOTE: The two drain plugs on the stern are each
connected to a bailer. When watercraft is on dry
land, the drain plugs can be removed to manually
drain the bilge.
Drain Plug Neck Removal
1. Open the boarding platform and remove the
rear storage bins (one each side).
2. Cut locking tie securing bailer hose to the drain
plug assembly.
smr2009-043-034_a
LEFT SIDE SHOWN (IBR ACTUATOR REMOVED)
1. Cut this locking tie
3. Unscrew the drain plug from the drain neck and
pull the drain plug out or the neck.
smr2009-043-032_a
DRAIN PLUG REMOVAL
1. Drain plug
2. Drain neck
4. Using a ratchet handle and extension of appro-
priate size, unscrew the drain neck from the
hull.
smr2009-043-033
DRAIN NECK REMOVAL
Drain Plug Neck Installation
1. Apply
LOCTITE 577 (THREAD SEALANT) (P/N 293
800 050)
on the drain neck threads.
2. Install drain neck and torque to 16 N•m
(142 lbf• in ).
3. Secure bailer hose to drain neck using a NEW
locking tie.
4. Reinstall all removed parts in the reverse order
of removal.
BOW EYELET
Bow Eyelet Removal
To remove the retaining nuts on the bow moor-
ing eyelet, an access hole must be cut in the fixed
deck. An etched line in the fixed deck located un-
smr2009-042
507