SCHUNK NSR-A 100, Сборка и руководство по эксплуатации

Страница: 34 / 68

Assembly
34
06.00 | NSR-A | Assembly and Operating Manual | en | 389722
5.3 Installing and connecting
Assembly, dismantling and modification work on the pallet
changing system may only be carried out by specialist personnel.
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
•
Before starting any work on the product: Switch off the power
supply and secure against restarting.
•
Make sure, that no residual energy remains in the system.
WARNING
Risk of injury due to crushing!
•
Install the pallet changing system with care.
•
Do not place any limbs into the gap or between the clamping
pallets and the machine.
CAUTION
Material damage due to incorrect tightening torques
During assembly, observe tightening torques,
Screw tightening torques [ } 47]
NOTE
• Observe the requirements for the compressed air supply,
Technical data [
}
18].
• In case of compressed air loss (cutting off the energy line), the
components lose their dynamic effects and do not remain in a
secure position. However, the use of a SDV-P pressure
maintenance valve is recommended in this case in order to
maintain the dynamic effect for some time. Product variants
are also offered with mechanical gripping force via springs,
which also ensure a minimum clamping force in the event of a
pressure drop.