manualshive.com logo in svg

SCHUNK NSR-A 100, Сборка и руководство по эксплуатации


Поделиться
Скачать
background image

Design and Description

06.00 | NSR-A | Assembly and Operating Manual | en | 389722

25

4.2 Pallet adapter for NSR-A 100

The PKL 100 pallet adapter was designed as a pallet changing
interface for the NSR-A 100 pallet changing system.
The pallet adapter provides the connection to the clamping pallet.
The pallet adapter has a locating surface and four mounting
screws for adapting the clamping pallet.

Clamping pin

Mounting stud 
for torsion resistance

Only DIN EN ISO 4762/12.9 M8 
mounting screws permissible

Bore holes for 
fastening with 
lag screws M6

Pallet adapter PKL 100 - 0°

Two long cylindrical screws act as lag screws and guarantee a high
holding force and rigidity with heavy loading weights. The
connection interface between the clamping pallet and pallet
adapter is shown in the "Connection interface between the
clamping pallet and pallet adapter" illustration.
Alternatively, the clamping pallets can be attached with two lag
screws.

Содержание NSR-A 100





































































Отзывы:

Нет отзывов

Похожие инструкции для NSR-A 100

ABB FIO-01 Quick Manual preview
FIO-01
Бренд: ABB Страницы: 14
Bartscher 1500/17 Original Instruction Manual preview
1500/17
Бренд: Bartscher Страницы: 28
Bartscher IV-65 Instruction Manual preview
IV-65
Бренд: Bartscher Страницы: 13
IBEX TS100 Quick Start Manual preview
TS100
Бренд: IBEX Страницы: 10
M-system R3 Series Instruction Manual preview
R3 Series
Бренд: M-system Страницы: 12
Farmi Forest Corporation VALBY HF 231 Operation, Maintenance And Spare Parts preview
VALBY HF 231
Бренд: Farmi Forest Corporation Страницы: 32
NanoVibronix UROSHIELD Quick Manual preview
UROSHIELD
Бренд: NanoVibronix Страницы: 2
NanoVibronix PainShield User Manual preview
PainShield
Бренд: NanoVibronix Страницы: 32
Nanoleaf Shapes Hexagons User Manual preview
Shapes Hexagons
Бренд: Nanoleaf Страницы: 27
Rainin Instrument P-10 Manual preview
P-10
Бренд: Rainin Instrument Страницы: 16
GE Venue 50 Basic Service Manual preview
Venue 50
Бренд: GE Страницы: 289
CAB PX Q4.3L Service Manual preview
PX Q4.3L
Бренд: CAB Страницы: 30
Teac BB-1000CD Release Notes preview
BB-1000CD
Бренд: Teac Страницы: 2
Wang 2228D Maintenance Manual preview
2228D
Бренд: Wang Страницы: 146
KUHN FC3160TCD Operator'S Manual preview
FC3160TCD
Бренд: KUHN Страницы: 112
Federal Signal Corporation G-SND-024-E Installation And Maintenance Instructions Manual preview
G-SND-024-E
Бренд: Federal Signal Corporation Страницы: 31
PMK 860-512-O00 Instruction Manual preview
860-512-O00
Бренд: PMK Страницы: 24
SteelFlex PLHP Assembly Instructions & Owner'S Manual preview
PLHP
Бренд: SteelFlex Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды