SCHUNK NSR-A 100, Сборка и руководство по эксплуатации

Страница: 13 / 68

Basic safety notes
06.00 | NSR-A | Assembly and Operating Manual | en | 389722
13
Safety during assembly and servicing
During assembly, connection, adjustment, commissioning and
testing, make sure that no accidental operation of the pallet
changing system by the fitter or other persons is possible.
Avoid any unsafe manner of working.
2.9.2 Holding force and screw strength
The holding force of the pallet changing system is essentially
limited by the tightness of the screw connection which connects
the clamping pin to the pallet adapter or the device. This is why
only screws of strength class 12.9 may be used for the screw
connection.
Only original SCHUNK clamping pins may be used.
If the clamping pin is to be used in customer-specific devices, a
sufficiently dimensioned pallet adapter or a sufficiently thick
mounting material is provided.
2.10 Transport
Handling during transport
Incorrect handling during transport may impair the product's
safety and cause serious injuries and considerable material
damage.
• When handling heavy weights, use lifting equipment to lift the
product and transport it by appropriate means.
• Secure the product against falling during transportation and
handling.
• Stand clear of suspended loads.
2.11 Malfunctions
Behavior in case of malfunctions
• Immediately remove the product from operation and report the
malfunction to the responsible departments/persons.
• Order appropriately trained personnel to rectify the
malfunction.
• Do not recommission the product until the malfunction has
been rectified.
• Test the product after a malfunction to establish whether it still
functions properly and no increased risks have arisen.