Light and Auxiliary Rocker Switches
Removal
1. Disconnect the battery and discharge the
capacitors (refer to Capacitor Discharge
procedure in the Electrical section). Remove
the top cover.
2. Remove the system controller from the
bracket (leave all harnesses connected).
Remove the cover from the system controller.
Avoid straining the wires connected to the
switches.
3. Unplug the key switch from the system
controller and disconnect all wires from the
rocker switches.
4. Release the retaining catches on the rocker
switch and remove it from the cover.
Replacement
1. Insert the switch into the cover until the switch
locks in place.
2. Connect the wires to rocker switches and plug
the key switch into the system controller.
3. Install the system controller cover. Install the
system controller in the bracket.
4. Install the top cover and connect the battery.
Keyswitch
Removal
1. Disconnect the battery and discharge the
capacitors (refer to Capacitor Discharge
procedure in the Electrical section).
2. Remove the top cover and remove the
system controller from the bracket (leave the
harnesses connected).
E
lectric
C
ounterbalance
H
igh
O
utput
Operator Controls
3/30/00
5.5
Figure 5.3 - Mechanism and Springs
