Scaime eNod4-C BOX, Руководство пользователя

Страница: 36 / 74

36
SCAIME Manual : NU-eNod4C-E-0418-196712-F.docx
11 OUTPUTS FUNCTIONING
Each output can be individually set to positive or negative logic.
11.1 Outputs assignment:
Function Functioning mode
transmitter checkweigher
None ● ●
Set point ● ●
Motion ● ●
Defective measurement ● ●
Input image ● ●
Level on request ● ●
Cycle in progress ●
Checkweigher result available ●
Checkweigher result out of tolerances ●
Checkweigher result within tolerances ●
Checkweigher result out of high tolerance ●
Checkweigher result out of low tolerance ●
11.2 Description:
11.2.1 None:
The output has no function
11.2.2 Set point:
The outputs can be assigned to configurable set points. Output 1 is assigned to set point 1, output 2 to set point 2 and
so on.
Set points can be assigned to:
•
gross measurement
•
net measurement
•
Checkweigher result
•
Checkweigher total running
Set points and are defined by a high value, a low value and a functioning mode.
Two functioning modes are possible:
•
Hysteresis