Scaime eNod4-C BOX Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 74

background image

13

SCAIME Manual : NU-eNod4C-E-0418-196712-F.docx

eNod4* is an analog data  processing unit  evaluated as a  part  of a  non-automatic  weighing instrument  (NAWI)  with
applicative software -T or an automatic weighing instrument (AWI) like an automatic gravimetric filling instrument with
applicative software -D or a catchweigher with applicative software -C. This instrument is not intended for direct sales
to the public. It is suitable for conditioning OIML R60 certified strain gauges load cell(s) with analog output.
Legal for trade mode has to be activated internally in order to respect metrological requirements. All the functionalities
will be conformed to the essential requirements for certified weighing instruments.
Sealing will be material on the eNod4 housing and load cell connections. If a junction box is used it will have to be sealed
too. eNod4 is fitted with a software sealing for metrological parameters and once activated, is composed of an event
counter and a CRC value of specific and adjustment parameters. These values shall be marked on the terminal device
connected  after  the  last  official  verification  when  putting  in  service  the  instrument.  Any  mismatch  between  the
displayed values on the terminal and those marked will signify a broken sealing.
eNod4 is fitted with a data storage device (DSD) so called alibi memory. Any weighing result (or checkweigher result
with applicative software -C, or dosing result with applicative software -D) is stored internally and can be recalled on
demand.  130816  records  can  be  stored  permanently  at  maximum.  Any  record  is  identified  by  a  unique  32-bit  long
number. This identifier is incremented each time a weighing result is stored and transmitted.
The minimum time between two DSD recording operations is 50ms.

* legal for trade use does not apply to software applicative for beltweigher (-B) and weigh feeder (-F)

«
...
11
12
13
14
15
...
»

Содержание eNod4-C BOX











































































Отзывы:

Нет отзывов

Похожие инструкции для eNod4-C BOX

Бренд: Faber Страницы: 8

Бренд: Access Страницы: 12

Бренд: Baby Trend Страницы: 24

Бренд: Baby Trend Страницы: 6

Бренд: Baby Trend Страницы: 6

Бренд: C3 Custom Coolers Страницы: 16

Бренд: Valor Страницы: 20

Бренд: Camozzi Страницы: 33

Бренд: Camozzi Страницы: 2

Бренд: Camozzi Страницы: 64

Ecomot300 AC2630

Бренд: IFM Electronic Страницы: 111

Бренд: Nacon Страницы: 24

Бренд: NAD Страницы: 4

Бренд: NAD Страницы: 4

Бренд: EasySMX Страницы: 11

Бренд: EasySMX Страницы: 8

Бренд: X-lander Страницы: 72

Бренд: X Rocker Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды