10
SBS System – SB-1000 Operation
Main Screen
This is the main display screen of the SB-1000, regardless of the balance mode set (automatic or manual).
The basic features are as follows:
1.
RPM indication. RPM values will not display if there is no incoming signal (spindle is stopped, or RPM
sensor is missing or shorted). A manual RPM value can be set if needed (see Manual Weight
Movement).
2.
Vibration level indication. Vibration values will not display if there is a vibration sensor error (missing
or shorted), or if there is no RPM value displayed.
3.
Vibration bar graph. Shows the current vibration level graphically. The scale is linear between the
current settings for Balance Limit and Balance Tolerance. A different linear scale applies between the
Balance Tolerance level and the Critical Balance level.
4.
Balance Limit. This fixed position on the graph indicates the current level set for the Balance Limit,
relative to the measured vibration level.
5.
Balance Tolerance. This fixed position on the graph indicates the current level set for the Balance
Tolerance, relative to the measured vibration level.
6.
Critical Balance Level. This fixed position on the graph indicates the current level set for the Critical
Balance, relative to the measured vibration level.
7.
Status indication area. Displays a number of icons to indicate status conditions. The general status
indications, common to both automatic and manual balance modes are as follows:
a.
- Front Panel Inhibit (FPI)
b.
- Machine ID number selected (shown only in multiple machine operation).
c.
- Tolerance Level exceeded. (Not shown) The symbol will display and flash in the same position
as the
symbol shown on the screen if the vibration is over the level set by the user for Balance
Tolerance.
d.
- Critical Balance exceeded. The symbol will flash if the vibration level is over the Critical
Balance level user setting.
e.
- Critical RPM exceeded. The symbol will display and flash if the RPM level is over the Critical
RPM user setting.
f.
- Error Condition. The symbol is displayed only if an error condition is present, but was hidden
by the user by pressing
Cancel. Press
again to display the hidden error(s).
3
4
5
6
2
7
1
