8
SBS System – SB-1000 Operation
Control Unit Operating Instructions
Front Panel Controls
The following figure illustrates the front panel of the Balance Control Unit.
1)
LCD Display. This screen is used to display data and show current settings and status information.
Information is displayed using a symbol based interface, which is independent of language. The display
will dim over a period of about 24 minutes when inactive (no user button presses).
2)
Setup
button. Press to access the operational settings of the control. Press and hold this button to
access the screen for selection of single machine or multiple machine operation.
3)
Cancel
button. Press to cancel the operation in progress, or cancel the last selection or entry made.
This button also clears any displayed error message.
4)
Balance
button. Press to start a balance operation (either automatic or manual, depending on current
mode set).
5)
Manual button. When in
Automatic Balance
mode press this button to access the Manual Weight
Movement screen, which allows the user to change position of the weights in the installed SBS balancer.
When operating in
Manual Balance
mode, this button is used to perform various steps in the manual
balance process.
6)
buttons. Manually move Balancer Weight 1, or change value of currently selected digit.
7)
buttons. Manually move Balancer Weight 2, or select digit.
6
7
4
5
2
3
1
