SBC MT 01, Техническое руководство

Страница: 50 / 132

GROUP S.P.A.
MT SBC 01 48
11
13
14
15
16
11. System connection terminals.
L L bus line connection.
CFP CFP Landing call input.
P2 C2 pushbutton P2 C terminals. NO. 24V 100mA dedicated to
various services (remove CV2 and CV3).
S+ S- Terminals for call repetition device.
12. JP1 Jumper for selection of Simplebus1 or Simplebus2 mode.
13. CV3 CV2 Jumper to be removed in order to have pushbutton
P2 C. NO.
14. DIP switch U2 for setting user code (see page 79).
15. DIP switch U4 for programming pushbuttons P1 and P2 (see
table on page 49).
16. Microphone volume control trimmer.
12
The “Elegance” interphone is equipped with a door lock release
pushbutton, indicator LED and two pushbuttons whose functions
can be set according to the system in which the unit is fitted.
To programme the user code, set DIP switch U2 as shown in the
table on page 79.
The unit is factory-set for use in Simplebus1 systems. To use
interphone Art. 2610 in Simplebus 2 and Simplebus Color systems,
see note below. Art. 2610 makes it possible to use the Doctor,
Actuator, automatic switch-on and Switchboard Call functions on
Simplebus1, Simplebus2 and Simplebus Color systems.
DIP switch U4 for assigning functions to each pushbutton should
be set as shown in the table on page 49.
Fitted with branch terminal Art. 1214/2C.
Description of Style interphone Art. 2610 and user information
1
3
4
5
6
7
7
8
9
10
2
1
3
2
5
4
7
6
9
8
1. 3-position ringtone/Privacy service selector:
High position: Max. ringtone volume.
Middle position: Medium ringtone volume.
Low position : Privacy function activation
(Privacy service means exclusion of the call ringtone from the
external unit and switchboard; activation of the Privacy function is
signalled by a red indicator appearing at the top right).
2. Privacy function indicator.
3. Indicator LED (available as standard).
4. Door lock release pushbutton .
5. Pushbutton 1 available as standard (programmable with various
functions, see table on page 79. Factory-set for Generic
Actuator function).
6. Pushbutton 2 available as standard (can be freed - see variant
SB/X on page 128 - or programmed with various functions,
see table on page 79. Factory-set for Switchboard Call
function).
7. Optional pushbuttons C. NO. or LEDs (MAX 3) for additional
functions (
A ).
8. Interchangeable cover Fig. 7 page 45.
9. Pushbutton memo label for indicating the interphone pushbutton
functions (to be applied under the interchangeable cover) Fig. 7
page 45.
10. Interphone handset (lift the handset to start communication).
(A) Pushbutton available with optional card Art. 1626.
Display LED available with optional card Art. 1627.
Clean using a cloth moistened with water. Do not use
alcohol or other aggressive products.
CAUTION !
TO USE INTERPHONE ART. 2610 IN SB2 OR SBC SYSTEMS (i.e. SYSTEMS WHICH USE
ART. 4896, 4888 or 4888C) JUMPER JP1 MUST BE MOVED TO POSITION S2
JP1
S2