SBC MT 01, Техническое руководство

Страница: 13 / 132

MT SBC 01
11 MT SBC 01
Digital directory module Art. 3342
INTRODUCTION
The Comelit digital call module Art. 3342 can be used in Simplebus type systems. It is
equipped with a name directory for storing a list of user names.
The main specifications are as follows:
• Memory capacity: 400 names of 18 alphanumeric characters.
• Graphic display with 128x64 dots/pitch resolution.
• 2 call management modes : Standard or indirect code.
• Entering the name list ( Download ) by means of programmer Art.1230 or by means of
connection with a PC fitted with software Art.1249/A.
• Entering the names by means of connection with the PC can be done over an RS232
line or over an RS485 line by means of the interface card Art.1319 ( see system
diagram CA_EN_108 on page 119).
• Reading (Upload ) of the name list stored in the directory module by means of
connection with a PC fitted with software Art.1249/A.
• Possibility of displaying the graphic interface messages in one of the 9 languages
available.
1) KEY FUNCTIONS
CALL – SELECT MENU
BACK: Scrolls through the user name
list in reverse alphabetical order
FORWARD: Scrolls through the user
name list in alphabetical order.
SEARCH FOR NAME - EXIT MENU
INITIAL CONDITION
4) SETTING THE LANGUAGE
4A) THE FIRST TIME THE MODULE IS TURNED ON, THE LANGUAGE HAS NOT YET
BEEN SELECTED
Module powered up SELECT LANGUAGE:
* ITALIANO
ENGLISH
Scroll the list by means of
the
▲▼
keys.
To select the desired
language press
* ITALIANO
ENGLISH
FRANÇAIS
The DEFAULT
option sets ITALIAN.
The next time the module is
turned on, selection of the
language is requested again
DISPLAY DESCRIPTION OPERATION
4B) CHANGING THE PREVIOUSLY SET LANGUAGE
Configuration mode has
been accessed (see
point 3). NAME DIRECTORY
ACCESS CONTROL
SETTINGS
SELECT LANGUAGE
* ITALIANO
ENGLISH
SELECT LANGUAGE
ITALIANO
* ENGLISH
The default language on
power-up is Italian. The
language set is marked by an
asterisk on the left-hand side.
The DEFAULT item sets the
ITALIAN language. The next
time the module is turned
on, selection of the
language is requested again
Select the SETTINGS /
SELECT LANGUAGE
Scroll the list by means of
the
▲▼
keys.
To select the desired
language press
DISPLAY DESCRIPTION OPERATION
2) INSTALLATION OF THE MODULE
To prevent any interference caused by electrostatic discharges, it is advisable to
screen the casing as shown in the diagram CA/EN/108 on page 119.
3) ACCESSING CONFIGURATION MODE
Module powered up
with terminal PR
connected to the terminal - The module is in
programming mode:
to select the menu
▲▼
to scroll through the
menu
to go back to the
previous menu
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
DISPLAY DESCRIPTION OPERATION
TEST DESCRIPTION
5) SELF-TESTING
On power-up, the device runs a diagnostic test of the connections to check for
correct communication with porter module Art. 1602/4660C.
If the word OK appears next to the item, then it has passed the test, otherwise, if the
word FAILED appears it has failed the test. On completion of self-testing, press the
▼
key to put the module in standby. The table below summarises the meaning of the
individual tests:
INITIALIZATION
SERIAL PORT
MODE
Checks the EEPROM which contains the user name list.
If the test fails, the module is faulty.
If the test fails, check correct serial connection with porter
module Art. 1602 / 4660C.
Checks presence of the alphanumeric keypad
which makes up Art. 3340. As it is not envisaged
for Art. 3342, the number 3342 should appear.
INITIAL CONDITION
6) USING THE NAME DIRECTORY
6A) SCROLLING THROUGH THE DIRECTORY AND CALLING THE SELECTED USER
Module powered up
and in standby. SCROLL NAMES
SEARCH NAME
Use the
▲▼
keys to scroll
through the directory.
Press to
exit.
Press to
call the selected user.
SMITH JOHN The names are entered
in alphabetical order.
The call takes place
correctly
The call did not take
place correctly
The system is engaged
DISPLAY DESCRIPTION OPERATION
CALL EFFECTED
Or:
USER NOT
AVAILABLE
Or:
USER BUSY
INITIAL CONDITION
6B) SEARCHING FOR A NAME IN THE DIRECTORY
Press the key
.
Module powered up
and in standby.
SEARCH
THE NAME
BY ENTERING INITIAL
And subsequently:
SELECT INITIAL:
A B C D E F G …
DISPLAY DESCRIPTION OPERATION
SCROLL NAMES
SEARCH NAME