SBC MT 01, Техническое руководство

Страница: 23 / 132

MT SBC 01
21 MT SBC 01
On software 1249/A
it is necessary to set CALL
MODE to Indirect Code
without name field.
If download was completed
successfully.
If an error occurred
during download.
DISPLAY DESCRIPTION OPERATION
ENTER USER
CODE
ENTER USER
CODE
ENTER USER
CODE
DOWNLOAD
TERMINATED
Or:
DOWNLOAD
FAILED
Connect the cable supplied
with software Art. 1249/A to
terminals TX / RX / - ( or D /
D- if you have an RS485
line).
Run the software
Art.1249/A.
Fill in the list with the Code
and Indirect Code fields in
software Art. 1249/A, or load
an existing list.
Press the Download button
in software Art. 1249/A.
10 = DEFAULT
0 = Connection by
RS232 line
0 = STANDARD
1 = Mode for porter modules
Art. 3262 and 3268
0
180
01
10
POSSIBLE VALUE DEFAULT VALUE PARAMETER
1=ITALIAN
2=ENGLISH
3=FRENCH
4=GERMAN
5=PORTUGUESE
6=DANISH
7=FINNISH
8=DUTCH
9=SPANISH
10=DEFAULT
(you will be asked
to select the language next
time module 3070/A is
switched on).
0 = Connection
by RS232 line
1 = Connection
by RS485 line
0 = STANDARD
1 = INDIRECT CODE
0 = Mode for porter
modules Art.3062
1 = Mode for porter
modules Art.3262 and
3268
Value from 01 to 255
Value from 10 to 180.
Expresses the duration in
seconds of the interphone
conversation.
Value from 01 to 99.
Expresses the duration in
seconds of closure of the
door lock release relay.
Value from 0 to 10.
Expresses the waiting time
in seconds before sending
the reset code at the end
of an interphone
conversation.
LANGUAGE
TYPE OF DOWNLOAD
CALL MODE
SIMPLEBUS MODE
ADDRESS RS485
AUDIO TIMING
DOOR LOCK RELEASE
TIME
RESET TIME
7) PARAMETERS TABLE
The table below shows the configuration parameters for module Art. 3070/A:
6C) READING (UPLOAD) OF THE STORED LIST
Using software Art. 1249/A it is possible, from module 3070/A, to read the list with the
Indirect Code and Code fields for INDIRECT CODE operating mode.
Art. 3070/A must be set to indirect code call mode.
It is necessary to perform the following operations:
INITIAL CONDITION
Module powered up
and in standby. ENTER USER
CODE
If the list was uploaded
successfully.
The list is deleted from
module 3070/A.
If an error occurred during
upload of the list.
DISPLAY DESCRIPTION OPERATION
ENTER USER
CODE
ENTER USER
CODE
UPLOAD
TERMINATED
Or:
UPLOAD
FAILED
Connect the cable supplied
with software Art. 1249/A to
terminals TX / RX / - (or
D / D- if you have an
RS485 line. Ref. wiring
diagram CA/EN/109 on
page 119).
Run the software
Art.1249/A.
Press the Upload
button in software Art.
1249/A.
The list will be uploaded to
software Art. 1249/A.