SBC MT 01 Скачать руководство пользователя страница 2

Страница: 2 / 132

GROUP S.P.A.

MT SBC 01

Warning

• Install the equipment by carefully following the instructions given by the manufacturer and in compliance with

the legislation in force.

• All the equipment must only be used for the purpose it was built for.

Comelit Group S.p.A.

declines any

responsibility for improper use of the apparatus, for modiﬁcations made by others under any title or scope,

and for the use of accessories and materials which are not the original ones.

• All the products comply with the requirements of the 2006/95/CE directives (which replace the 73/23/CEE

directives and the successive amendments). This is proved by the

mark on the products.

• Do not run the riser wires in proximity of the power supply cables (230/400V).

Содержание MT 01





































































































































Результаты поиска

Содержание MT 01

Отзывы:

Похожие инструкции для MT 01

Бренды по названию

Популярные бренды

SBC MT 01, Техническое руководство

Результаты поиска

Содержание MT 01

Отзывы:

Похожие инструкции для MT 01

Бренды по названию

Популярные бренды