Setup and Installation | 34
Installing the Ink Cartridges
Keep ink and ink containers out of reach of children.
If ink gets into contact with eyes, flush eyes with clean, lukewarm water (low
pressure) for at least 15 minutes, occasionally lifting eyelids to ensure that the
chemical is being flushed out of the eyes. Obtain medical attention.
If ink is ingested, wash out mouth with water provided person is conscious.
Consult a doctor immediately.
When removing jammed paper or replacing ink, avoid getting ink on your clothing.
If ink comes into contact with your clothing, immediately rinse the stained area
with cold water and wash the garment with laundry detergent per the care
productions provided on the label.
When removing jammed paper or replacing ink, avoid getting ink on your skin. If
ink comes into contact with your skin, wash the affected area thoroughly with soap
and water. If irritation develops, seek medical attention.
When removing the ink cartridge, avoid putting your hand near the place where
the ink cartridge is installed. If ink comes in contact with your hands, wash them
thoroughly with soap and water. If irritation develops, seek medical attention.
When installing the ink cartridge, do not touch the inside of the printer.
Do not turn the printer on until you have been instructed to do so.
1. Be sure to install
the Sawgrass SubliJet-HD ink cartridges
.
2. Remove the packaging from the ink cartridges.
Do not touch the ink supply ports or chip contacts of ink cartridges.
3. Open the right front cover.
