Monitoring and Configuring the Printer | 76
[SSL/TLS] page
You can specify [SSL/TLS(443)] and [Permit SSL/TLS Communication].
[Site Certificate] page
[Imported Site Certificate]
You can select [Delete] or [Update to Trustworthy Certificate] for an imported
site certificate.
[Site Certificate to Import]
Import the site certificate according to the displayed instructions.
[Device Certificate] page
You can select [Create], [Request], [Install], [Install intermediate Certificate],
[Delete/Cancel Request], and [Delete intermediate Certificate] for up to three
certificates.
[Certification]
Select the certificate to be used in [SSL/TLS], [Wireless LAN], and [IPsec].
[IPsec] page
You can specify [IPsec].
You can configure up to ten parameters.
Notifying the Printer Status by E-mail
You can be notified of the printer status by e-mail on an occasion such as if the printer runs
out of paper or paper is jammed.
The e-mail notifying the printer status will be sent to the e-mail address specified as the
destination in advance. You can also specify the timing and status to notify.
Depending on your e-mail application, a phishing warning message might appear
when you receive e-mail. To stop this warning message, see your e-mail
application's Help for details about registering trusted senders.
To receive reports of the printer’s status by e-mail, set [Notify by Email] to [On] in the
[System] menu, then specify an e-mail address and other required settings using Web
Image Monitor. The [Auto Email Notification] setting can be changed only by the
administrator.
The following status can be notified:
The printer error has occurred.
The ink has run out.
The ink will run out soon.
The Waste Collection Unit must be replaced now.
