Setup and Installation | 37
1. Plug the power cord fully into the printer.
2. Plug the power cord fully into the wall outlet.
Make sure the power cord is not trapped under the printer.
3. Press the [Power] key.
The printer will start performing the initial ink fill.
Do not disturb the printer while it is performing the initial ink fill.
Leave the printer idle for about six minutes until the message "Ready" appears.
Do not remove the plug from the wall outlet while the ink is being fed.
You may hear a clicking sound while the initial ink fill is being performed. This is not a
malfunction and will stop after the process is complete.
When ink is completely fed, the [Power] key stops flashing and remains lit.
